Stone Crusher

It has overload hydraulic cavity and refrigeration lubricating system, which fully ensure the safety and stability of operation. It is widely used in metallurgical mining, architectural, rock & railway, etc.

Main structures is consist of main body, the horizontal axis, movable cone, balancing wheels, eccentric shaft bushing, fixed cone, dynamic cone, fluid couplings, lubrication systems, hydraulic system, control system, etc.
Material is extruded in two cones, squeezed and bended, which can low power consumption.

This series cone crusher adopt dry-oil and water seal way, which protect from dust and impurities entering the body, thus extending the service life of the sliding bearing and the thrust ball bearings to ensure the reliable operation.
Cubic product shape and the cones surface is more uniform wear

The standard type (PYB) is applied to secondary crushing and the short-head (PYD) are applied to fine crushing.
Continuous rotating of movable cone; continue unloading of materials during the crushing process alternately along the work surface, high production efficiency and capacity

5). Cubic product shape and the cones surface is more uniform wear
6). Dynamic cone and fixed cone is upright. There is a gap parallel with the crushing discharge chamber when the movable cone swinging, which make uniform products. The feed edge is not big enough, so the material after primary crushing is suitable for crushing.

Continuous rotating of movable cone; continue unloading of materials during the crushing process alternately along the work surface, high production efficiency and capacity,
Material is extruded in two cones, squeezed and bended, which can low power consumption.
Cubic product shape and the cones surface is more uniform wear

Through V-belt, transmission shaft, eccentric shaft sleeve, the motor drives the mantle to rotate in a fix circle. Then the mantle approaches or departs from the concave now and then so to crush the material constantly in the crushing cavity.

The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make sure reliable performance. This type of crushing chamber depends upon the size of feeding and fineness of the crushed product.

It has overload hydraulic cavity and refrigeration lubricating system, which fully ensure the safety and stability of operation. It is widely used in metallurgical mining, architectural, rock & railway, etc.
Material is extruded in two cones, squeezed and bended, which can low power consumption.

The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
When objects are discharged from crushing chamber, discharging hole will automatically reset.

The axial lead of the crushing cone swings under the enforcement of the eccentric bushing so that the surface of concavel approaches and leaves the surface of the rolling wall by turns. Thus the ores within the crushing chamber are crushed under the constant compression and bending.

The feed edge is not big enough, so the material after primary crushing is suitable for crushing.Main structures is consist of main body, the horizontal axis, movable cone, balancing wheels, eccentric shaft bushing, fixed cone, dynamic cone, fluid couplings, lubrication systems, hydraulic system, control system, etc.

It can crush materials with Mohrs scale in middle and high hardness such as ironstone, copper ore, limestone, quartz, granite, rock and so on. The type of the crushing chamber is depend on the material; the standard type is suitable for medium crushing, medium type for fine crushing, ultra-short head type is superfine.

Advantage:
1.Large proportion of broken
2.Uniform particle size products
3.Simple structure
4.High reliability
5.Easy maintenance
6.Less operating costs

Advantage:
1.Large proportion of broken
2.Uniform particle size products
3.Simple structure
4.High reliability
5.Easy maintenance
6.Less operating costs

Advantage:
1.Large proportion of broken
2.Uniform particle size products
3.Simple structure
4.High reliability
5.Easy maintenance
6. Less operating costs

Advantage:
1. Large proportion of broken
2. Uniform particle size products3.Simple structure4High reliability5.Easy maintenance6. Less operating costs

Advantages of Fine jaw crusher
1, a large proportion of broken
2, reliable and convenient, flexible
3, safe and reliable
4, simple structure
5, low operating costs
6, energy-saving equipment

advantage:
1.Large proportion of broken
2.Uniform particle size products
3.Simple structure
4.High reliability
5.Easy maintenance
6.Less operating costs

advantage:
1.Large proportion of broken
2.Uniform particle size products
3.Simple structure
4.High reliability
5.Easy maintenance
6.Less operating costs